Products and services

Low-main­te­nance ground­wa­ter telemetry

Reliable, Affordable Telemetry

We offer mul­ti­ple solu­tions for ground­wa­ter mon­i­tor­ing. The equip­ment can be pur­chased or acquired via oper­a­tional lease. The ground­wa­ter lev­el is mea­sured using a pres­sure sen­sor and trans­mit­ted wire­less­ly in real-time to our dash­board. There, all mea­sure­ments are secure­ly stored for you to eas­i­ly view, com­pare, and export.

We provide:

24/7 real-time insight

All mea­sure­ments are sent direct­ly to our secure cloud envi­ron­ment, where you can view them imme­di­ate­ly. No need to go to the mea­sure­ment well to retrieve measurements.

Versatile dashboard

The Blik dash­board offers a sim­ple and clear overview of all mea­sured val­ues. Data can be export­ed from the dash­board to Excel or CSV, for exam­ple, allow­ing you to eas­i­ly com­bine the data with your own data and systems.

Robust equipment

Our equip­ment has been devel­oped in-house from the ground up to be robust, low-main­te­nance, and durable. The equip­ment is ful­ly IP-68 water-resis­tant*, fea­tures a bat­tery that lasts 8 years with a mea­sure­ment inter­val of 1 hour, and a field-replace­able bat­tery and plumb bob.

* The plumb bob can remain under­wa­ter indef­i­nite­ly. The trans­mit­ting equip­ment is guar­an­teed for up to 72 hours at a depth of 2 meters.

Usable anywhere

Our solu­tion can be deployed in any mon­i­tor­ing well: The dig­i­tal plumb bob can be sus­pend­ed up to 200 meters deep, and the trans­mit­ting equip­ment is com­pact enough to fit even in the small­est street pots. Exter­nal anten­nas are avail­able for recep­tion in steel conduits.

Built for water management

Our dash­board was designed and built by Blik from the ground up. As a result, it is ful­ly geared towards the sim­ple and clear mon­i­tor­ing of ground­wa­ter. We are always open to feed­back and are hap­py to think along with you about how the dash­board can best sup­port you in your tasks.

Is there some­thing miss­ing from the dash­board? Because our dash­board is devel­oped in-house, cus­tom adjust­ments and addi­tions are always possible.

Clear insights

See all infor­ma­tion col­lect­ed by the node (water lev­el, baro­met­ric infor­ma­tion, pre­cip­i­ta­tion data) at a glance.

/

Integration with other systems

By means of an open REST API, the same data acces­si­ble via the Blik dash­board can also be auto­mat­i­cal­ly queried by oth­er sys­tems. This allows you to build con­nec­tions to oth­er sys­tems your­self (or have them built).

We also have exist­ing con­nec­tions with var­i­ous wide­ly used sys­tems. Do we not yet have a con­nec­tion with a sys­tem you use? We would be hap­py to build one for you.

MacBook met het Blik dashboard open.

Technical information

Specifications

Water lev­el sen­sor length 100 mm 3.9 inch
includ­ing pro­tec­tive cap
Water lev­el sen­sor diameter 19 mm ¾ inch
Max­i­mum sen­sor cable length 220 m 700 ft
Mea­sure­ment technology Pres­sure transducer
Typ­i­cal error ± 0.4 cm ± 0.3 inch
Oper­at­ing temperature -10 … +70 °C 14 … 158 °F
Com­mu­ni­ca­tion LTE‑M and NB-IoT
Ter­res­tial and non-ter­res­tial (NTN) networks.
Bat­tery life 5 years (when mea­sur­ing once per hour)

Applications

  • NLong-term ground­wa­ter lev­el monitoring
  • NGround­wa­ter lev­el projects
  • NAutoma­tion of ground­wa­ter monitoring
  • NWater catch­ment areas, drainage areas and riv­er basins
  • NMap­ping cur­rents and water lenses
  • NMon­i­tor­ing storm surge drainage
schematische weergave van een peilbuis met node in straatpot
Down­load the spec sheet

Efficient and clear

Pur­pose­ful and stream­lined to pro­vide a clear view of the ground­wa­ter. The first mea­sure­ments can be stud­ied* with­in just 1 hour of instal­la­tion, and the node requires no main­te­nance. The entire chain con­sists of 1 inte­grat­ed sensor/telemetry solu­tion so that mon­ey and time can be saved.

* depend­ing on the mea­sure­ment frequency

Simple and robust

Our node is sim­ple to use, robust­ly built, and can oper­ate on a set of bat­ter­ies for up to 8 years*. The node itself is placed at the top of a mon­i­tor­ing tube, and the dig­i­tal plumb bob goes into the tube. The cable length can be spec­i­fied in advance so that it always fits per­fect­ly. Fur­ther­more, no infra­struc­ture is required – the mea­sure­ments are received on the Blik dash­board via exist­ing com­mu­ni­ca­tion networks.

* depend­ing on the mea­sure­ment frequency

Email us

info@blik-sensing.com

i

Legal

Dutch Cham­ber of Com­merce num­ber: 71730230
VAT: NL 858826744B01

Powered by  GDPR Cookie Compliance
Privacy Overview

This website uses cookies so that we can provide you with the best user experience possible. Cookie information is stored in your browser and performs functions such as recognising you when you return to our website and helping our team to understand which sections of the website you find most interesting and useful.